I recently installed a turbosmart boost tap and then my boost gauge stopped working right after install. Is it because I removed the hose going to the solenoid? Anyone got any ideas on how I could get it to work again?
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Boost guage not working after installing boost tap
Started by Mitsushitty, Jan 31 2020 06:41 AM
boost guage boost tap problem
#1
Posted 31 January 2020 - 06:41 AM
Mitsushitty
-
- Members
-
- 3 posts
Newbie
- LocationNew Zealand
Back to top
#2
Posted 31 January 2020 - 10:54 PM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Bit more info might help.
Where do you have the reference for the gauge?
It should not be the same place you have the tap.
It should be from the inlet manifold and the tap should be in between j pipe and wastegate.
Where do you have the reference for the gauge?
It should not be the same place you have the tap.
It should be from the inlet manifold and the tap should be in between j pipe and wastegate.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#3
Posted 01 February 2020 - 04:28 AM
Mitsushitty
-
- Members
-
- 3 posts
Newbie
- LocationNew Zealand
The tap is installed between the wastegate and j pipe. Not sure about where the guage is getting boost reading from as it was on the car when I bought it I'll have a look into that.
Bit more info might help.
Where do you have the reference for the gauge?
It should not be the same place you have the tap.
It should be from the inlet manifold and the tap should be in between j pipe and wastegate.
#4
Posted 01 February 2020 - 05:05 AM
Mitsushitty
-
- Members
-
- 3 posts
Newbie
- LocationNew Zealand
Just looked into it the boost gauge was getting its reading from the vent side on the solenoid but when I installed the boost tap I removed the boost line running to the solenoid so where should I run the boost line for the gauge now?
The tap is installed between the wastegate and j pipe. Not sure about where the guage is getting boost reading from as it was on the car when I bought it I'll have a look into that.
#5
Posted 01 February 2020 - 07:34 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Read my post, Ive answered your question already.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
Also tagged with one or more of these keywords: boost guage, boost tap, problem
|
4G Powered Technical Discussion →
Evolution 1-3, CC GSR Technical →
Cold start issuesStarted by 3VOLUTIONIST, 27 Aug 2014  Cold, start, problem, gsr
|
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
