Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

Trigger Wheel For Wolf 3D V5

- - - - -

  • Please log in to reply
3 replies to this topic

#1
Booyar

Booyar

    Newbie

  • Members
  • Pip
  • 9 posts
  • LocationWagga Wagga NSW

Hi guys,

 

Is anyone out there running a Wolf 3D ECU on a VR4 or other DOHC 4G engine? If so I'm curious as to what trigger disc you used, was it the stock item or a Wolf 4+2 dual pulse replacement disc?



#2
Derek

Derek

    Advanced Member

  • Active Members
  • PipPipPip
  • 110 posts
  • LocationBrisbane, Australia

We currently use the L-300 Dizzy which is 4+1 on our SOHC, you can configure the wolf to use the STD CAS of a VR4 with 4+2.



#3
Booyar

Booyar

    Newbie

  • Members
  • Pip
  • 9 posts
  • LocationWagga Wagga NSW

Thanks Derek, do you know if you can use the factory trigger disc on a VR4 with the Wolf ECU?



#4
Derek

Derek

    Advanced Member

  • Active Members
  • PipPipPip
  • 110 posts
  • LocationBrisbane, Australia

Thanks Derek, do you know if you can use the factory trigger disc on a VR4 with the Wolf ECU?

 

 

Yes you sure can, just need to tell it to skip/ignore the 2nd reference pulse. When you open up the CAS you should see 4 slots around the outer edge, these are the cylinder triggers obviously. The inner slots , 1 will be quite long & the other short, use the short signal as the reference/sync signal.


Edited by Derek, 07 February 2019 - 06:27 AM.



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users