So I have this gt3076 and the intake is approx 80mm I'd like an intake pipe that is either silicone or as stock looking as possible. I saw mamba intake pipes for the Evo 4-6 but realise the MAF is oval as opposed to round.
Any suggestions??
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 11 February 2018 - 11:17 AM
Rvr_HSG
-
- Active Members
-
- 92 posts
Advanced Member
- LocationGold Coast, Queensland
Back to top
#2
Posted 11 February 2018 - 09:30 PM
Ian91
-
- Active Members
-
- 1,651 posts
Advanced Member
- LocationPomona, Sunshine Coast, QLD
Get some alloy bends, cut them up and tape them together how you want, them drop them into a fabrication place, paint it black afterwards for the stealth look.
#3
Posted 11 February 2018 - 10:53 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Plastidip for that rubber look. Grind down the welds
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#4
Posted 12 February 2018 - 12:50 AM
Rvr_HSG
-
- Active Members
-
- 92 posts
Advanced Member
- LocationGold Coast, Queensland
#5
Posted 12 February 2018 - 03:35 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Plastidip wont last long once oil, radiator fluid etc spills on it.
Better off with a proper high temp black I reckon.
Better off with a proper high temp black I reckon.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#6
Posted 12 February 2018 - 05:50 AM
VIN18M
-
- Active Members
-
- 1,209 posts
Advanced Member
- LocationSydney
Get it powdercoated in black wrinkle finish. Don't paint it yourself, speaking from experience there is nothing worse than having to be careful of scratching paint when you're swinging spanners in the engine bay.
Did this with my rocker cover and never looked back, going to do the same with the (visible) plumbing soon.
#7
Posted 12 February 2018 - 05:58 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
How much did rocker cover cost you Vinnie?
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#8
Posted 12 February 2018 - 07:39 AM
VIN18M
-
- Active Members
-
- 1,209 posts
Advanced Member
- LocationSydney
Got it done at Hi Octane in Rydalmere, couldn’t recommend them highly enough.
$116 to sandblast and powder coat the rocker cover, and courier it to my work in North Sydney. Dropped it off on Saturday and it arrived with me the following Wednesday from memory.
Sand blasting and powder coating alone was $90.
Some might say that’s expensive but you go to the expense of building an engine, I figure it’s worth every cent.
$116 to sandblast and powder coat the rocker cover, and courier it to my work in North Sydney. Dropped it off on Saturday and it arrived with me the following Wednesday from memory.
Sand blasting and powder coating alone was $90.
Some might say that’s expensive but you go to the expense of building an engine, I figure it’s worth every cent.
#9
Posted 12 February 2018 - 08:59 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Thats pretty cheap actually.
I have seen their work in person too.
Thanks.
I have seen their work in person too.
Thanks.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#10
Posted 12 February 2018 - 09:40 AM
VIN18M
-
- Active Members
-
- 1,209 posts
Advanced Member
- LocationSydney
#11
Posted 12 February 2018 - 02:41 PM
White Knight
-
- Active Members
-
- 930 posts
Advanced Member
- LocationGympie
Bloody hell that is cheap Vin.
My intake is pretty much as Ian was saying. 3 inch mandrel 90° bend with a silicone joiner at the mouth of the turbo, tapped a 1 1/4 (?) inch pipe into it for the BOV and another joiner to MAF.
Noisy when you get on it, being hard pioe and all but worth it.
My intake is pretty much as Ian was saying. 3 inch mandrel 90° bend with a silicone joiner at the mouth of the turbo, tapped a 1 1/4 (?) inch pipe into it for the BOV and another joiner to MAF.
Noisy when you get on it, being hard pioe and all but worth it.
#12
Posted 12 February 2018 - 07:05 PM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
We all like one thats noisy when you get on it......
- White Knight likes this
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#13
Posted 13 February 2018 - 06:11 AM
EV0300
-
- Active Members
-
- 1,502 posts
Advanced Member
- LocationVictoria, Geelong
thats cheap.. i paid $250 to have mine painted and its got a few chips in it already... pretty disappointed
#14
Posted 13 February 2018 - 07:21 AM
VIN18M
-
- Active Members
-
- 1,209 posts
Advanced Member
- LocationSydney
#15
Posted 13 February 2018 - 08:28 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Looks shmick!
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#16
Posted 14 February 2018 - 10:27 AM
SlowBloke
-
- Members
-
- 1 posts
Newbie
- LocationLaura, SA.
Here’s how mine came out...
https://imgur.com/a/sERbb
Very nice! What is the battery you are using and how is it performing?
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
