Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

Soon to be E85

- - - - -

  • Please log in to reply
88 replies to this topic

#81
vr401

vr401

    4G63T

  • Active Members
  • PipPipPip
  • 910 posts
  • LocationSydney

Your boost will stay up through to 7k with that turbo :thumbsup:

revving to 8k mate  :w00t:  


Lancer Evolution 7 GSR '01

#82
vr401

vr401

    4G63T

  • Active Members
  • PipPipPip
  • 910 posts
  • LocationSydney

two things that will have to support this turbo setup if I want to push maximum out of it: 

1-Transfer case rebuilt (stronger case with bigger bolts and wavetrac lsd)

2-Bigger injectors ( only 1150cc atm )


Lancer Evolution 7 GSR '01

#83
vr401

vr401

    4G63T

  • Active Members
  • PipPipPip
  • 910 posts
  • LocationSydney
It's happening.


20180715_122405.jpg 20180715_161722.jpg 20180715_161730.jpg
Lancer Evolution 7 GSR '01

#84
evo-gsr

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,192 posts
  • LocationBuddhist Temple NSW
Updates on how the MAMBA went?
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#85
vr401

vr401

    4G63T

  • Active Members
  • PipPipPip
  • 910 posts
  • LocationSydney

Updates on how the MAMBA went?

Turbo is great mate.Comes on boost very early. Couple of hundreds of rpm latter than evo 8 stock but keeps pushing to the red line.

Well worth the money. 

 

I hit the limit of my injectors and pump as you can se in the pic running lean after 5500rpm

With low boost as shown it made great power.

Now i have walbro 460 installed, FIC 2150cc injectors, new radium fuel rail with inlet rubber hose and fuel damper as well. Pump is running 3 stages voltage and there is plenty of fuel up the top.

Just need a time to start tuning for 30-32psi of boost to see where it's going to end up being.

 

this is dyno readout with mamba run and last run on Evo 8 turbo

More to come  :)

Screenshot 2018-09-27 23.18.43.png


Lancer Evolution 7 GSR '01

#86
vr401

vr401

    4G63T

  • Active Members
  • PipPipPip
  • 910 posts
  • LocationSydney

BTW: I've tested my base pressure today. With all radium staff plus walbro 460 on stock low voltage and stock fpr with venturi pipe drilled to 3.5mm pressure sits at 45psi without vacuum hose. Pretty close to stock 43psi so I'm more than happy to leave it as is.   


Lancer Evolution 7 GSR '01

#87
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,220 posts
  • Locationperth sor. 20 mins from brians place
How are you getting 3 stages of voltages at the pump? I know there is 2 on the Evo ECU.. not familiar with a 3rd stage.

I was thinking to change out the low voltage resistor block with a pwm module. That way the pump duty could be adjusted infinitely.

Great to see you are still going with this car.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#88
vr401

vr401

    4G63T

  • Active Members
  • PipPipPip
  • 910 posts
  • LocationSydney

How are you getting 3 stages of voltages at the pump? I know there is 2 on the Evo ECU.. not familiar with a 3rd stage.
I was thinking to change out the low voltage resistor block with a pwm module. That way the pump duty could be adjusted infinitely.
Great to see you are still going with this car.


I kept stock evo 7 fuel pump voltage control and besides that i connected pressure switch to my vacuuum line that switches on at 15psi triggering relay I setup to let the power to pump directly from battery using 15amp fuse and very thick wire. It's like running hardwire setup but pressure switch turns on the relay instead of constant high voltage so at low psi it remains on stock voltages.
This helps to control base pressure at idle. Evo ecu lets you dial in the loads vs rpm to turn on second stage voltage so i set it up the way it makes smooth transition to high voltage. If it turns on early low is 9v to high around 12v pump suddenly bumps the fuel pressure so it may cause reach run if set too low.

Hope it all make sense
Lancer Evolution 7 GSR '01

#89
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,220 posts
  • Locationperth sor. 20 mins from brians place
Absolutely makes sense!
I wasn't keen on the factory resistor to drop the pressure on the low setting. It's just like running a big toaster under the bonnet. I thought a pwm module would be much more efficient.
For highspeed pump, i was thinking to use a lipo, and your relay setup (or actually a variable voltage trigger on the AFM or boost sensor, or TPS). The relay to trigger a 18v or 20v lipo. When it's off, a charger could recharge it.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users