Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

DYNO TUNER GOLD COAST

- - - - -

  • Please log in to reply
32 replies to this topic

#21
Hyper_Mike

Hyper_Mike

    Advanced Member

  • Active Members
  • PipPipPip
  • 564 posts
  • LocationGold Coast

I'm going to tune mine myself with ECMlink, I have a stocker in atm so i'll throw 1000cc inj and 25g at it and experiment on it before the forged engine goes in........Mwahahaha.
 
Butt dyno and test and tune for me! $900 can go towards a HX35/HX40 or nitrous when I get bored.



I wish man, I am so nervous about even driving the car without having it tuned first that I think once I get the head done I will just put it straight on a trailer and tow it up to brissy.

#22
Hyper_Mike

Hyper_Mike

    Advanced Member

  • Active Members
  • PipPipPip
  • 564 posts
  • LocationGold Coast

Anyone had any work done by ChipTorque in Nerang before?

Quoted me $1000 for my tune.



#23
htgsr

htgsr

    HTGSR

  • Active Members
  • PipPipPip
  • 745 posts
  • LocationSurfers

Just book it in at PITS. Ring him book it in, never look back.



#24
leadfoot

leadfoot

    Moderator

  • Moderators
  • 3,429 posts
  • LocationGold Coast

chip torque do alot of stuff they made the flash tuner that MCM used on the forester


yes it's me KHUBNER


#25
Hyper_Mike

Hyper_Mike

    Advanced Member

  • Active Members
  • PipPipPip
  • 564 posts
  • LocationGold Coast

So after all the choices I have gone with PITS. Was quoted around $1200 including the install and new vacuum line run to the ECU.



#26
htgsr

htgsr

    HTGSR

  • Active Members
  • PipPipPip
  • 745 posts
  • LocationSurfers

Sweet we will all have to t up a test an tune night an go have some fun



#27
leadfoot

leadfoot

    Moderator

  • Moderators
  • 3,429 posts
  • LocationGold Coast

mike i strongly suggest you plug it in and atleast turn the key to on before you go (this way you know the ecu receives power) i had to earth out one of the wires on the efi relay to close the circuit


yes it's me KHUBNER


#28
Hyper_Mike

Hyper_Mike

    Advanced Member

  • Active Members
  • PipPipPip
  • 564 posts
  • LocationGold Coast

mike i strongly suggest you plug it in and atleast turn the key to on before you go (this way you know the ecu receives power) i had to earth out one of the wires on the efi relay to close the circuit


Was that when you were using my loom? That sucks I hope it's all good :(

#29
leadfoot

leadfoot

    Moderator

  • Moderators
  • 3,429 posts
  • LocationGold Coast

nah on my home made one so unless there's something buried in the haltech loom that i didn't or couldn't replicate. you may experience the same issue. this was easy enough to fix i n9ow just have another relay that trips the efi relay from the ign switch


yes it's me KHUBNER


#30
htgsr

htgsr

    HTGSR

  • Active Members
  • PipPipPip
  • 745 posts
  • LocationSurfers

How did this thing go?



#31
leadfoot

leadfoot

    Moderator

  • Moderators
  • 3,429 posts
  • LocationGold Coast

still at the tuner awaiting work


yes it's me KHUBNER


#32
Hyper_Mike

Hyper_Mike

    Advanced Member

  • Active Members
  • PipPipPip
  • 564 posts
  • LocationGold Coast

How did this thing go?


Yep I'm stillll waiting.

#33
htgsr

htgsr

    HTGSR

  • Active Members
  • PipPipPip
  • 745 posts
  • LocationSurfers

Still waiting?




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users