Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

evo7 ecu or immobolizer?

- - - - -

  • Please log in to reply
2 replies to this topic

#1
Chris Nguyen

Chris Nguyen

    Newbie

  • Members
  • Pip
  • 2 posts
ok so the car is an evo7 (manual) .. was driving down the road noticed the engine light came on within about 2mins the car shut off ... so i try to start it up again , it starts and sounds normal but will only idle for about 3 - 5 secs before shutting off again, even with foot on accelerator the car will still turn off .. i had a mechanic hookup his scanner to the ecu to see what codes its giving , turns out its giving multiple codes (too many) crank angle,spit sensor,cam sensor,afm etc etc all the main sensor codes came up .. now my mechanic reckons from his experience that when you usually get that many codes all at once its usually the ECU playing up? so i looked around for another ECU,but found out not many ppl have them and if they did it ranges from $250 - $500, thats a great gamble but have spoken to another person and i was advised to remove the cars immobilizer (also has aftermarket mongoose) because if the immobilizer is not working correctly it could send error codes to the ECU causing the car to keep shutting down and should atleast start from there .. will be having that removed tomorrow , has anyone had similiar issues?

#2
blackvr

blackvr

    Advanced Member

  • Active Members
  • PipPipPip
  • 574 posts
  • LocationAdelaide
Sounds like a common symptom for an Evo 7... starts and then dies... try replacing the cam position sensor. In 99% of Evos with similar issue to yours, this cured the problem. It would be VERY unusual for the ECU to give grief !

#3
Evlgurl

Evlgurl

    Member

  • Members
  • PipPip
  • 17 posts
  • LocationAustralia
Agreed, the majority of EVO's we have seen come through the workshop with that fault it has always been the Cam position sensor.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users