Date Added: 04 July 2011 - 07:31 PM
Owner: bazeng
Short Description: Aus Spec GVR4.
View Vehicle
Edited by bazeng, 24 April 2017 - 07:28 AM.
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
BAZENG. Street spec Galant VR4. (1991)
1 votes
Started by bazeng, Jul 05 2011 12:31 AM
Welding of exhaust parts done
#1
Posted 05 July 2011 - 12:31 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Name: Mitsubishi Galant VR4 (1991)
Date Added: 04 July 2011 - 07:31 PM
Owner: bazeng
Short Description: Aus Spec GVR4.
View Vehicle
Date Added: 04 July 2011 - 07:31 PM
Owner: bazeng
Short Description: Aus Spec GVR4.
View Vehicle
- Mjolnir likes this
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
Back to top
#2
Posted 03 October 2011 - 06:54 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Improvements made on the VR4.
Timing belt adjustment and idler pulley replaced (NSK one went bad after 5000km's????)
Kiggly racing crank timing sensor fitted - no more fluctuating timing from belt stretch.
Exhaust housing upgraded (thanks Cheeks)
Turbo oil feed restrictor installed.
Turbo oil line feed filter installed.
Sump / timing cover thread fixed (short one which is under the tbelt - thread stripped in timing cover.... helicoiled the thing!)
Will get it back in for a tune and see how she pulls with the new crank trigger.
Thinking of getting the Autronic Knock board just to see how much I can make on pump 98.
A good note:
For those guys who have balance shafts removed, use part number MD128107 to replace the actual balance shaft gear that sits behind the harmonic balancer / timing plate.
See last attachment for more details.
Timing belt adjustment and idler pulley replaced (NSK one went bad after 5000km's????)
Kiggly racing crank timing sensor fitted - no more fluctuating timing from belt stretch.
Exhaust housing upgraded (thanks Cheeks)
Turbo oil feed restrictor installed.
Turbo oil line feed filter installed.
Sump / timing cover thread fixed (short one which is under the tbelt - thread stripped in timing cover.... helicoiled the thing!)
Will get it back in for a tune and see how she pulls with the new crank trigger.
Thinking of getting the Autronic Knock board just to see how much I can make on pump 98.
A good note:
For those guys who have balance shafts removed, use part number MD128107 to replace the actual balance shaft gear that sits behind the harmonic balancer / timing plate.
See last attachment for more details.
Attached Thumbnails
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#3
Posted 03 October 2011 - 07:02 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Turbo swap pics:
Found: leaky turbo gasket. This time I torqued the MFer up real good! With some copper exhaust gasket also.
.82 and 1.06 is very very very different!
Hopefully this will give me more power up top and less down low. I'm over breaking drivetrain parts so the less power down low the better at the moment.
I managed to swap the exhaust housing with the turbo / exhaust manifold still in the car!
It was alot more fiddly but I wasn't in the mood to pull everything apart and break all the seals etc.
Found: leaky turbo gasket. This time I torqued the MFer up real good! With some copper exhaust gasket also.
.82 and 1.06 is very very very different!
Hopefully this will give me more power up top and less down low. I'm over breaking drivetrain parts so the less power down low the better at the moment.
I managed to swap the exhaust housing with the turbo / exhaust manifold still in the car!
It was alot more fiddly but I wasn't in the mood to pull everything apart and break all the seals etc.
Attached Thumbnails
- bj likes this
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#4
Posted 03 October 2011 - 10:12 AM
TRQ-STR
-
- Active Members
-
- 596 posts
Advanced Member
- LocationMelbourne
Glad you are finally updating a proper thread on this site!!!!!
Keep the updates coming mate, I love your builds!
Keep the updates coming mate, I love your builds!
----|VR4 4G63 RS|MicroTech lt8s|TD0625g|Ported & Polished Head|HKS Front Mount|3" Exhaust|----
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|
#5
Posted 03 October 2011 - 01:33 PM
3zercrowd
-
- Administrators
-
- 8,388,607 posts
Donating Member
- LocationTownsville
Timing belt adjustment and idler pulley replaced (NSK one went bad after 5000km's????)
(OT but) Thats funny... my KOYO idler did the same thing. I wasnt looking out for it but just happened to clean it up and spin it and yeah, the bearing feels rough as guts with fuck all K's on it
Great progress anyway
QUOTE OF THE YEAR>>> BTW... does anyone else have a sore ass??
Dane/Lancer GSR
12.315@109.75MPH!!!
STILL Needs more Kilowatts!
Members rides> http://4gtuner.com/s...read.php?t=1910
#6
Posted 03 October 2011 - 02:49 PM
JayRome
-
- Active Members
-
- 4,958 posts
Blurring the line between 1st to 3rd Gen engines....
- LocationMelbourne
Nice bro! weathers getting better for us to work on our cars!...
Chosen Weapons:
WideBody Galant GSR 4g63 N/A+T Hybrid 1st/3rd gen +AWD
Audi A3 slow POS
#7
Posted 14 October 2011 - 03:19 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Hopefully I get some time over the weekend to put everything back together and give it a spin.
Just purchased an OEM mitsu uni joint and it is much bigger / better than the repco stuff. No wonder I snapped mine...
I'm considering putting on a stock xfer case and stock tailshaft with oem mitsu uni''s and giving the car another crack with a big launch.
The goal is to get off the line at 6000rpm with 30psi of boost! lol
Just purchased an OEM mitsu uni joint and it is much bigger / better than the repco stuff. No wonder I snapped mine...
I'm considering putting on a stock xfer case and stock tailshaft with oem mitsu uni''s and giving the car another crack with a big launch.
The goal is to get off the line at 6000rpm with 30psi of boost! lol
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#8
Posted 19 October 2011 - 12:01 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Car back together and on the ground.
The obvious changes with the new setup are:
1. Turbo spool less evident at idle -> quick rev
2. Less flutter
3. Oil pressure higher with new thicker oil
Gonna get it tuned in fwd and take it down the track in FWD mode. I wonder what 136mph in AWD does in FWD? lol..
Gonna be fun!
Also see pics of broken uni (REPCO BRAND) vs OEM MITSU uni joint. It is obvious that the MITSU stuff is much more superior.
The obvious changes with the new setup are:
1. Turbo spool less evident at idle -> quick rev
2. Less flutter
3. Oil pressure higher with new thicker oil
Gonna get it tuned in fwd and take it down the track in FWD mode. I wonder what 136mph in AWD does in FWD? lol..
Gonna be fun!
Also see pics of broken uni (REPCO BRAND) vs OEM MITSU uni joint. It is obvious that the MITSU stuff is much more superior.
Attached Thumbnails
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#9
Posted 19 October 2011 - 12:25 AM
SIKWPN
-
- Active Members
-
- 355 posts
Advanced Member
- LocationMelbourne
very nice baz, when are you gonna donate me ur dog box? 
MICKENSTEIN ][][][
braaap brap bbbrraaaap brrrap sSSssSSSsSsSSSsSsHHhHhHhHHHHhh TuTu Ut TuT uTut UTUt uTuTuT utU TuT utttuuUu
#10
Posted 20 October 2011 - 04:13 AM
SIVART
-
- Sponsors
-
- 4,973 posts
CE9A-0000001
- LocationMelbourne
good to see the comparison
be good to see how they hold up
be good to see how they hold up
#11
Posted 11 January 2012 - 05:09 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Any chance that the mods can unlock my previous private rides thread in here?
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#12
Posted 08 May 2012 - 01:05 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
TIme for an update:
GT35R sold to somebody here on the forums
New T51R SPL setup currently being installed.
Other changes include:
New tailshaft
New radiator (old custom one for sale if anybody is interested)
New fuel system (old pump is for sale if anybody needs an 044)
New injectors (anybody need some 1600cc injectors? I need 2200's for my setup)
Currently being built at home.
GT35R sold to somebody here on the forums
New T51R SPL setup currently being installed.
Other changes include:
New tailshaft
New radiator (old custom one for sale if anybody is interested)
New fuel system (old pump is for sale if anybody needs an 044)
New injectors (anybody need some 1600cc injectors? I need 2200's for my setup)
Currently being built at home.
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#13
Posted 08 May 2012 - 01:07 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Pics!
Attached Thumbnails
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#14
Posted 08 May 2012 - 01:10 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
More
Attached Thumbnails
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#15
Posted 08 May 2012 - 01:15 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
More again...
Attached Thumbnails
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#16
Posted 08 May 2012 - 01:22 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
More more more
Attached Thumbnails
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#17
Posted 08 May 2012 - 01:27 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Final for tonight
Attached Thumbnails
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#18
Posted 08 May 2012 - 01:43 PM
TRQ-STR
-
- Active Members
-
- 596 posts
Advanced Member
- LocationMelbourne
Car porn!!!
----|VR4 4G63 RS|MicroTech lt8s|TD0625g|Ported & Polished Head|HKS Front Mount|3" Exhaust|----
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|
#19
Posted 08 May 2012 - 10:26 PM
D3bb4
-
- Active Members
-
- 514 posts
Advanced Member
- LocationSydney
#20
Posted 28 May 2012 - 01:29 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Turbo oil and water lines done
Attached Thumbnails
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
