Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

Cranked

Cranked

Member Since 07 Jun 2007
Offline Last Active Oct 18 2019 02:12 AM
-----

#342307 Aftermarket exhaust manifold

Posted by Cranked on 17 December 2018 - 10:18 AM

Yeah I saw that one Jay. My concern is where that WG position is. 6boost does one but I'm not sure in a 38mm WG. Which 38mm has done everything I need and can regulate boost from 12psi to 26psi so far.


#342285 Newbie

Posted by Cranked on 14 December 2018 - 01:09 AM

Welcome Dave. You're hailing from the Emerald isle I see. There is a myriad of knowledge and wisdom here. The search function is your friend. Give us a rundown in your car and throw some pics up. 👍


#342138 Electrical issues - E1?

Posted by Cranked on 13 November 2018 - 02:10 AM

If you have a volt meter, do a parasitic draw test.

There are heaps of videos on YouTube on the procedure, but you basically monitor than amperage across the battery and keep pulling fuses until it goes to 0. Then you know which circuit you are looking at.

Good luck.


Current across the battery.... Hmmmm


#341846 Forged or cast bottom end?

Posted by Cranked on 29 August 2018 - 07:30 AM

Speak to Andrew at Sideways Motorsports. He is a top guys and knows his stuff.


#341614 Throttle body connector

Posted by Cranked on 22 July 2018 - 04:23 AM

Pretty sure it's the idle speed controller


#341138 WideBody ZR4

Posted by Cranked on 28 April 2018 - 04:35 AM

Cos he wants to have as many different brands of car parts as possible.... 😂


#340375 What's needed to run 30psi?

Posted by Cranked on 10 February 2018 - 11:48 AM

My 6 bolt made 400 atw on pump at 21psi


#338805 wrecking 1991 rs vr4 galant

Posted by Cranked on 08 September 2017 - 11:33 PM

Meek. Lol


#338368 Bazeng - GTO 2nd Gen. 6G72 build

Posted by Cranked on 15 August 2017 - 10:27 AM

Exactly 😂


#337969 Bazeng - GTO 2nd Gen. 6G72 build

Posted by Cranked on 17 July 2017 - 03:09 AM

Oh those turbos are so cute
  • ted likes this


#337561 Forged steel

Posted by Cranked on 18 June 2017 - 10:18 AM

Yeah Mitsubishi turbo diesel come forged.
  • Taz likes this


#336478 Haltech E8 Base Map

Posted by Cranked on 28 March 2017 - 03:44 AM

There will be a base map for a 63 on the Halwin Software. Then you will have to adjust your fuel trim/scaling for the bigger injectors, you can do it as a percentage value, which will be the quickest way.


  • ted likes this


#336364 evo 1 attempted theft (joyride)

Posted by Cranked on 20 March 2017 - 09:47 PM

Unfortunately they are very easy to get into, A simple cable tie and your in, in less than 10 seconds. I'd go a hidden kill switch, a fuel, ignition cut or both, a momentary switch and a relay setup with retaining contacts, that way the car would start unless that button is pushed every time.




#336178 How to change gear ratios to 3.545

Posted by Cranked on 15 March 2017 - 09:45 AM

Well no offence, but why would people want to regurgitate what has already been covered several times.


#336164 How to change gear ratios to 3.545

Posted by Cranked on 15 March 2017 - 04:48 AM

Plenty of info on here if you search.