Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

bride

- - - - -

  • Please log in to reply
12 replies to this topic

#1
p3akin

p3akin

    Advanced Member

  • Active Members
  • PipPipPip
  • 2,906 posts
  • LocationMelbourne
Fellas,

Just out of curiosity, what would be needed to fit bride brix seats in a gsr .. what rails etc..

Thanks Peter
Current: 04 E46 M3 S/C
89 E30 325is

RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900

#2
OFFON-4

OFFON-4

    Nothing Under 35psi!

  • Active Members
  • PipPipPip
  • 3,284 posts
  • LocationMelbourne
My one are customer rails..i ripped my old ones out! wouldnt have a clue as with the standard one as the ones supplied with the seats didnt fit

#3
p3akin

p3akin

    Advanced Member

  • Active Members
  • PipPipPip
  • 2,906 posts
  • LocationMelbourne
does bride make rails for gsr's though dave?
Current: 04 E46 M3 S/C
89 E30 325is

RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900

#4
OFFON-4

OFFON-4

    Nothing Under 35psi!

  • Active Members
  • PipPipPip
  • 3,284 posts
  • LocationMelbourne
Dont think they do bud, the kit i got was supposed to be a universal one but that is never the case

#5
p3akin

p3akin

    Advanced Member

  • Active Members
  • PipPipPip
  • 2,906 posts
  • LocationMelbourne
ah fuck..

and do u not work? LOL
Current: 04 E46 M3 S/C
89 E30 325is

RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900

#6
OFFON-4

OFFON-4

    Nothing Under 35psi!

  • Active Members
  • PipPipPip
  • 3,284 posts
  • LocationMelbourne
LoL

Always working Pete.....always hahahaha
Now shut up and get back to work!

#7
Evo-00x

Evo-00x

    4G63T AWD CC COUPE

  • Donating Members
  • PipPipPip
  • 8,151 posts
  • LocationNewcastle
my brother fitted Bride seats into a Proton (same as Lancer). He used the Recaro seat rails from the EVO 1-6.5 and a custom made mounting plate on top of it. i.e. fitted an entire plate to the bottom of the Brides, then made holes in the plate to bolt onto the EVO rails.
AWD. 2 Litre. GTX3076R 0.82.
330kw atw @ 28psi 98 pump fuel.

372kw atw @ 28psi E85 Flexfuel.
EVOLVED AWD COUPE
WWW.EVOCOUPE.NET

#8
DOUGMO

DOUGMO

    yoni lover

  • Active Members
  • PipPipPip
  • 8,885 posts
  • LocationMelbourne
See if there is bride rails to suit a 6

GENUINE CE9A evo2 gsr track car
all fabrication BJP AUTOMOTIVE
winton 1:27.4 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1
/// eastern creek 1:35.4 /// winton short 1:01.4


#9
LAN-EVO3

LAN-EVO3

    Member

  • Active Members
  • PipPipPip
  • 230 posts
  • LocationSydney
depends what bride seats you wannt to use... a set of buddy club rails can take bride side mounted seats. thats what im using now. except im using buddy club seats with the rails. lol..not bride, too $$$.

and it sits you really low too ;)
....::::BUILT FOR TOUGE::::....

#10
p3akin

p3akin

    Advanced Member

  • Active Members
  • PipPipPip
  • 2,906 posts
  • LocationMelbourne
any pics of your seats LAN-EVO3?

i like the bride brix 1.5
Current: 04 E46 M3 S/C
89 E30 325is

RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900

#11
LAN-EVO3

LAN-EVO3

    Member

  • Active Members
  • PipPipPip
  • 230 posts
  • LocationSydney
ill take one asap...on morning shift 3am to 3pm.

i have a mate thats around 185cm height and with the buddy club set on the second lowest front and third lowest rear...he heas plenty of room.

i know a mate of mine is running a buddy club rail with bride zeta seats on a 180 and it sits him pretty much on the floor pan.
....::::BUILT FOR TOUGE::::....

#12
Golfer2000

Golfer2000

    Advanced Member

  • Members
  • PipPipPip
  • 39 posts
  • LocationUSA
I just finished mounting my bride seats to my oem sliders and the seats are crazy high. What's the easiest way to fix this?

my brother fitted Bride seats into a Proton (same as Lancer). He used the Recaro seat rails from the EVO 1-6.5 and a custom made mounting plate on top of it. i.e. fitted an entire plate to the bottom of the Brides, then made holes in the plate to bolt onto the EVO rails.



#13
romeo

romeo

    Advanced Member

  • Active Members
  • PipPipPip
  • 619 posts
  • LocationLiverpool NSW

ive got bride digo r seats in my gsr. evo 4-6 rails sits nice and low no issues what so ever.

https://www.nengun.c...e/rails-ro-type these fit brix II seats not sure if any difference between brix and brix II




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users