Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

Oil filter ejected!

- - - - -

  • Please log in to reply
15 replies to this topic

#1
LumpyVR4

LumpyVR4

    Advanced Member

  • Active Members
  • PipPipPip
  • 350 posts
  • LocationSydney

Don't you hate it when about 100km after an oil change the filter spontaneously ejects near a major intersection, and then you pump the contents of your sump all over the road. On the upside this resulted in an instant oil pressure light I managed to spot in about 100m.

 

The fireies came out and sawdusted the road for me. There were a few close calls before they turned up. But fortunately no fender benders. There were lots of people though, who thought the best way to deal with a loss of traction while accelerating was more throttle.

 

No idea where the filter went? Had a unsuccessful look for it. I could see it was instant big leak by the oil on the road. No oil, lots of oil. I'm assuming the thread failed because there are small remnants of it on the filter mount.


ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.


#2
Cranked

Cranked

    Advanced Member

  • Donating Members
  • PipPipPip
  • 1,237 posts
  • LocationWollongong
What brand? There was an issue with a batch of filters having the thread not quite right. It was posted on here ages ago.
GSR Lancer- JE-73-VO, 11.701@125mph, 1.79 60" and getting faster. No:3 conrod now orbiting the moon.

#3
LumpyVR4

LumpyVR4

    Advanced Member

  • Active Members
  • PipPipPip
  • 350 posts
  • LocationSydney

It was a Ryco ST


ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.


#4
VIN18M

VIN18M

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,209 posts
  • LocationSydney

I had the issue with Ryco filters. There was a batch of them that had different heights on the top plates for some reason, this meant there was less thread for the filter to grab onto. Lukcily mine did the same thing but in my garage and I was able to shut it off before I caused any issues.

 

I'd write in to them and make a formal complaint, it helps if you have photos and the filter in question obviously. All I got was 4 x new filters from them (the correct ones). Not sure if they have since fixed the issue as I always check them before buying them now and haven't come across the ones with the problem.

 

Here's the thread I posted...

 

http://www.4gtuner.c...l=+ryco +filter



#5
White Knight

White Knight

    Advanced Member

  • Active Members
  • PipPipPip
  • 930 posts
  • LocationGympie
Faaaarrrrrrkkkkkk. Glad your sensor worked hey, could have been disastrous.

#6
VIN18M

VIN18M

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,209 posts
  • LocationSydney

No sensor - just my eyes and my paranoia when I started the car after the service. I always walk around the car, look under it for strange noises, leaks and smells.



#7
evo-gsr

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW
I think he is referring to the OP, Vinnie.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#8
VIN18M

VIN18M

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,209 posts
  • LocationSydney

I think he is referring to the OP, Vinnie.

Ahh right, thought that was a bit weird  :huh:



#9
evo-gsr

evo-gsr

    Advanced Member

  • Active Members
  • PipPipPip
  • 10,379 posts
  • LocationBuddhist Temple NSW

Ian is a bit weird...he is from Gympie..that says it all really :w00t: 


[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]

#10
ozyvr4

ozyvr4

    Advanced Member

  • Active Members
  • PipPipPip
  • 555 posts
  • LocationBrisbane, Banyo
I had a similar problem to this on a coffee and laps at Queensland Raceway. The filer loosened a tad and blew the Oring out of the groove. Lucky for the light idiot light and guage. It was a k&n filter.
2001 Legnum daily

A-spec VR4 FP3052 in construction.

#11
White Knight

White Knight

    Advanced Member

  • Active Members
  • PipPipPip
  • 930 posts
  • LocationGympie

Ian is a bit weird...he is from Gympie..that says it all really :w00t:

Pretty much nailed it Jamo.... lol.

#12
Ian91

Ian91

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,651 posts
  • LocationPomona, Sunshine Coast, QLD

Pretty much nailed it Jamo.... lol.


I’ve met him, can confirm haha....




Just kidding he’s a mad dude

#13
LumpyVR4

LumpyVR4

    Advanced Member

  • Active Members
  • PipPipPip
  • 350 posts
  • LocationSydney

Something interesting I noted on the weekend when I finally got a chance to deal with the Galant, was Ryco have changed the bottom of their filter. At first I thought the thread was deeper in the filter but I measured it and it was the same. I did note however that when I put the verniers in an old filter and then into a new one, what was an interference fit in the old one had a little play in the new one.

 

On the good news side, I filled the sump (it was empty in 100m) fired her up and everything seems OK. Pressure is right and there are no horrible noises like rod knock etc.


ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.


#14
White Knight

White Knight

    Advanced Member

  • Active Members
  • PipPipPip
  • 930 posts
  • LocationGympie
Thank god for that!!! Weird about the interference/play between the old and new though....

#15
VIN18M

VIN18M

    Advanced Member

  • Active Members
  • PipPipPip
  • 1,209 posts
  • LocationSydney

You won't believe it but I did an oil change on my car on the weekend and it appears there are still some of these "out of spec" Z411 filters floating around. I had the filter blow off on startup and spew oil all over the garage floor. Luckily I shut the car off straight away so no harm done. I got suspicious as this hasn't happened since the last time I had issues, so I checked some filters I had on the shelf at home and they were the correct versions.

 

I'm tempted to spend the extra coin and go to a K&N from now on.



#16
LumpyVR4

LumpyVR4

    Advanced Member

  • Active Members
  • PipPipPip
  • 350 posts
  • LocationSydney

Bugger, but at least you were still in the garage. Funny you should mention K&N, because in light of my experience I'm thinking that I'm going to go with them in the future too.


ECM Link, 399 MAF, 560cc injectors, 270 cams, TD05-20G @22psi, 3" dump, full 3" mandrel exhaust, intercooler, Fidanza alloy flywheel, 4 bolt LSD, EVO IV brakes, Strut braces, coil overs and sway bars.



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users