0
Has anyone or is using one of these?
I currently have one installed but I'm having alot of vacuum leak from somewhere. I've taken it off and reused it again to make sure bolts or anything is preventing a seal.
I've read on dsmtuner that it works on a few threads about it, though I think I beg the differ - till I get an oem gasket and see has I go with it.
It does reduce the heat but leaks Im uncertain.
Some reviews would be nice.
#1
Posted 22 January 2012 - 12:17 AM
-
- Active Members
-
- 584 posts
Advanced Member
- LocationBrisbane
91 CB Lancer GSR 4g61
91 CB Lancer GLX 4g15 - GSR 4g61 - vr4 4g63t
91 CB Lancer GSR - 4G61 - vr4 4g63t
91 FZR Yamaha - 600cc
06 FZ6 Yamaha - 600cc
91 CB Lancer GLX 4g15 - GSR 4g61 - vr4 4g63t
91 CB Lancer GSR - 4G61 - vr4 4g63t
91 FZR Yamaha - 600cc
06 FZ6 Yamaha - 600cc
Back to top
#2
Posted 22 January 2012 - 12:39 AM
View Garage
I used a gizzmo one on my evo and have another to go on
I also have a nylon one on my starlet, both with no issue at all
what material is it made from? nylon or phenolic?
I also have a nylon one on my starlet, both with no issue at all
what material is it made from? nylon or phenolic?
GENUINE CE9A evo2 gsr track car
all fabrication BJP AUTOMOTIVE
winton 1:29.8 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:37.6
all fabrication BJP AUTOMOTIVE
winton 1:29.8 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:37.6
#3
Posted 22 January 2012 - 12:44 AM
-
- Moderators
-
- 3,692 posts
Member
- LocationBrisbane - Southside
Looks like nylon on mine. I have no leak issue with mine either Jono. ( I have the Magnus one )
Tim
Dsmlink V3 + E85 :drool: 11.37 @ 131.46 ... still more in her
Dsmlink V3 + E85 :drool: 11.37 @ 131.46 ... still more in her
Quote
Magnus
How much time do you spend in a parking lot with your performance car? If you do a lot of parking lot driving, and hang out in parking lots, chances are you are a ricer, go home and read import tuner. If you’re complaining about noise you should not be modifying your car. You should also consider no longer being a man, please hand in your genitals at the door.
How much time do you spend in a parking lot with your performance car? If you do a lot of parking lot driving, and hang out in parking lots, chances are you are a ricer, go home and read import tuner. If you’re complaining about noise you should not be modifying your car. You should also consider no longer being a man, please hand in your genitals at the door.
#4
Posted 22 January 2012 - 01:33 AM
-
- Active Members
-
- 584 posts
Advanced Member
- LocationBrisbane
brisvr4, on 22 January 2012 - 12:44 AM, said:
Looks like nylon on mine. I have no leak issue with mine either Jono. ( I have the Magnus one )
I was gonna say phenolic tim lol
Atm I can't get the car to idle period without tighten the throttle cable or adjusting the idle screw further - open butterfly throttle.
Biss screw is all the way out and still stalls so I have something seriously wrong with vacuum.
Cleaned throttle body, Ic pipes are seal, biss screw o-ring changed, last but least was the gasket. Doesnt take much to change it so I'll know if I did swap, it's that or something else.
Thoughts?
91 CB Lancer GSR 4g61
91 CB Lancer GLX 4g15 - GSR 4g61 - vr4 4g63t
91 CB Lancer GSR - 4G61 - vr4 4g63t
91 FZR Yamaha - 600cc
06 FZ6 Yamaha - 600cc
91 CB Lancer GLX 4g15 - GSR 4g61 - vr4 4g63t
91 CB Lancer GSR - 4G61 - vr4 4g63t
91 FZR Yamaha - 600cc
06 FZ6 Yamaha - 600cc
#5
Posted 22 January 2012 - 06:53 AM
get someone to keep the car running for you and get a length of hose and run over all of the joins, manifold etc.. holding
the hose up to your ear, you should hear in the hose if there is a leak
the hose up to your ear, you should hear in the hose if there is a leak
GENUINE CE9A evo2 gsr track car
all fabrication BJP AUTOMOTIVE
winton 1:29.8 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:37.6
all fabrication BJP AUTOMOTIVE
winton 1:29.8 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:37.6
#6
Posted 10 February 2012 - 07:24 AM
-
- Active Members
-
- 584 posts
Advanced Member
- LocationBrisbane
update
Boost leak from BOV and rear of TB - spring accelerator
Boost leak from BOV and rear of TB - spring accelerator
DOUGMO, on 22 January 2012 - 06:53 AM, said:
get someone to keep the car running for you and get a length of hose and run over all of the joins, manifold etc.. holding
the hose up to your ear, you should hear in the hose if there is a leak
the hose up to your ear, you should hear in the hose if there is a leak
91 CB Lancer GSR 4g61
91 CB Lancer GLX 4g15 - GSR 4g61 - vr4 4g63t
91 CB Lancer GSR - 4G61 - vr4 4g63t
91 FZR Yamaha - 600cc
06 FZ6 Yamaha - 600cc
91 CB Lancer GLX 4g15 - GSR 4g61 - vr4 4g63t
91 CB Lancer GSR - 4G61 - vr4 4g63t
91 FZR Yamaha - 600cc
06 FZ6 Yamaha - 600cc
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
