Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

ecmlink connections

- - - - -

  • Please log in to reply
7 replies to this topic

#1
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,299 posts
  • Locationperth sor. 20 mins from brians place
looking in my ecmlink box, i have this cable. i not sure it is the right one?
http://www.ecmtuning...&products_id=42
is this the same cable as you have used?

ok, i have this plug on the gsr loom in the wreck. it is on the side of the fuse box, but has only 1 wire to it.
http://www.ecmtuning.../diagport-12pin
i imagine i will need these wires in the link as well?
my gsr manual calls this connector b51 (page 68) and says there is no connection. my wreck has 1 wire to it. the jummy doesnt have this plug at all
the above link suggests i need 3 wires only, but what pins do they connect to on the gsr ecu? the evo connections are there.

brian, yours is evo ecu isnt it? and i think that evo and gsr will not swap over without changing some ecu pins?
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#2
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,299 posts
  • Locationperth sor. 20 mins from brians place
is on page 101 of general electrical. (1993 1.5) seems as listed at
http://www.ecmtuning.../diagport-12pin

use pins 42 and 43 on ecu. will try anyway...
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#3
BMGTZ

BMGTZ

    Grumpy old man from the school of hard knocks

  • Donating Members
  • PipPipPip
  • 4,554 posts
  • Locationsouthside of perth WA
mate as discussed last night....take a look at the wreck on the weekend

BRIAN
Black evo 1 full road rego and done properly/legally

I have heaps of parts...but never the one I need.

 

 


#4
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,299 posts
  • Locationperth sor. 20 mins from brians place
completed and working/logging etc. woo hoo.
not hard, pin 42 on ecu goes to pin1 on obd1,
pin 43 on ecu goes to pin10 on obd1,
earth goes to pin 12 on obd1

i wired mine so obd1 plug sits above glovebox for ease of use. got a obd1 plug from tr magna, and wired it to the back of the ecu plug.

now if i could get the car stereo/gps to run ecmlink it would be real good

Edited by jack of all, 26 October 2011 - 01:26 PM.

4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#5
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,299 posts
  • Locationperth sor. 20 mins from brians place

mate as discussed last night....take a look at the wreck on the weekend


sorry brian, you know how impatient i get
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#6
BMGTZ

BMGTZ

    Grumpy old man from the school of hard knocks

  • Donating Members
  • PipPipPip
  • 4,554 posts
  • Locationsouthside of perth WA
so ....does it all work now?

BRIAN
Black evo 1 full road rego and done properly/legally

I have heaps of parts...but never the one I need.

 

 


#7
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,299 posts
  • Locationperth sor. 20 mins from brians place
yea, i think so. it logs in real time, i changed the tps settings with the laptop. seems fine.
i never used it before, but i think its ok
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.

#8
jack be nimble

jack be nimble

    master of none

  • Donating Members
  • PipPipPip
  • 8,299 posts
  • Locationperth sor. 20 mins from brians place
i suppose i can put this here with this topic. i had some issues when putting my ecmlink chip in. when i first installed it it buzzed and clicked the relays and the cel wouldnt turn off. i plugged the old chip back in and car fired up no probs. put the ecm chip back in and same issues. several swaps later and it fired up and ran fine!!! plugged laptop in and it fired up no probs. then i took ecmlink out and put old chip back in as i needed car first up in the morning.
the next day when installing ecmlink again, i couldnt get it to work. found this:
http://www.dsmlink.c...ead.php?t=22307
in post #4 the link shows the preferred socket. i had the cheap one they rekon is crap. so, off to jaycar to get the recommended socket. piggybacked it onto socket on ecu and lo and behold the car fired right up.

moral is if you have issues and the cheap socket, you may have to change it to the recommended one.
4g93t jumbuck conversion. PRANGED 18/3/12, CHECK MY MEMBER RIDES Page 11. no serious human injuries.
ON THE ENGINE STAND. g4cs 2.4l + Gt35r. PLUS: auto conversion + Awd coming.
thanks for parts and help: BMGTZ, EVOCPE, cwolf, Benozi, Jamo-GSR, 1JUM2NV, RXVII..much appreciated, cheers guys.
Aerodynamics are for people who can't build engines. —Enzo Ferrari
REMEMBER: you cant polish a turd, but you can roll it in glitter.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users