Quick and easy. Yet to be completed. Need to make some ducts and diverter plates to direct cold air in...
Sent from my MI 5s using Tapatalk
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#81
Posted 31 October 2017 - 10:13 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Did some cooling mods for the engine oil cooler and trans oil cooler.
Quick and easy. Yet to be completed. Need to make some ducts and diverter plates to direct cold air in...
Sent from my MI 5s using Tapatalk
Quick and easy. Yet to be completed. Need to make some ducts and diverter plates to direct cold air in...
Sent from my MI 5s using Tapatalk
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
Back to top
#82
Posted 31 October 2017 - 10:17 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
On Sunday I attended the MCM regional meet at Winton raceway. It drove to the track without any issues.
As I went to drive on the track the car started playing up! Fouling plugs, running rich.....
Managed to do a session (20 mins) of cruising with other cars.. Had some fun. Beat some wrx's...
Managed to get it home and figured out it was leaky injectors....
I had the laptop and could resolve the tune. One second rich as a pig (9:1), the next 14:1.....
It was doing my head in.. On cruise it was fine... Just idle...
So injectors will be sent out for a service...
Sent from my MI 5s using Tapatalk
As I went to drive on the track the car started playing up! Fouling plugs, running rich.....
Managed to do a session (20 mins) of cruising with other cars.. Had some fun. Beat some wrx's...
Managed to get it home and figured out it was leaky injectors....
I had the laptop and could resolve the tune. One second rich as a pig (9:1), the next 14:1.....
It was doing my head in.. On cruise it was fine... Just idle...
So injectors will be sent out for a service...
Sent from my MI 5s using Tapatalk
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#83
Posted 02 November 2017 - 03:42 AM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
I got my injectors serviced at EFI Hardware. They found that two injectors were flowing 5% less than the other two. Really good service and turnaround time. Highly recommended.
Edited by ENGINR, 02 November 2017 - 03:53 AM.
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#84
Posted 24 December 2017 - 07:46 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
OK so I had my injectors tested and they are perfect.
No issues whatsoever.
I'm going to rewire my fuel pump to run a relay. I'm thinking it could be voltage related.
Sent from my MI 5s using Tapatalk
No issues whatsoever.
I'm going to rewire my fuel pump to run a relay. I'm thinking it could be voltage related.
Sent from my MI 5s using Tapatalk
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#85
Posted 24 February 2018 - 11:40 AM
bennygsr
-
- Active Members
-
- 148 posts
Advanced Member
- LocationMelbourne
Hey Bazeng,
Nice car!
I was wondering which club you joined to get your VR4 on club plates.
I plan on putting my Evo1 on club plates. Tried PM'ing you, but you "can't accept new messages"
Thanks,
Benny
#86
Posted 24 February 2018 - 11:44 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
Contact infini car club mate.
Jesse is his name
Jesse is his name
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#87
Posted 19 July 2018 - 10:11 AM
ozyvr4
-
- Active Members
-
- 555 posts
Advanced Member
- LocationBrisbane, Banyo
Looks great mate. I like the grill for the auto cooler. i want to do something similar on my legnum. I have the cooler in the same place.
2001 Legnum daily
A-spec VR4 FP3052 in construction.
A-spec VR4 FP3052 in construction.
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
