Forums

Forums RSS for most forum areas http://www.4gtuner.com/index.php Thu, 23 Feb 2012 07:59:56 +0000 15 dougmos evo2 project http://www.4gtuner.com/topic/3271-dougmos-evo2-project/
about to start the big project of turning it into

a track/hillclimb car,

fun and games

Attached thumbnail(s)

]]> Thu, 23 Feb 2012 07:59:56 +0000 http://www.4gtuner.com/topic/3271-dougmos-evo2-project/ Buy my sick parts sale! http://www.4gtuner.com/topic/16358-buy-my-sick-parts-sale/ *****NEW parts today 19/2/2012*****

Cusco radiator air guide $80

racepro fibreglass evo 3 side skirts, brand new, not big enough for what I need - $220

universal flares - new - $100

Fibre glass headlight lenses - new-made in japan - $100

*Full set of GL lancer door trims with handles,regulators, winders.
Same as RS but grey. - $150

Genuine exedy chrome moly flywheel - only 400km old - $250

*Lexan rear door windows and rear door 1/4 windows.
High quality ML12 UV safe, professionally cut in stock shapes - $175
(with rare Team4g stickers on the 1/4s

)

*Evo 2 throttle body, professionally enlarged to 63mm
just been fully rebuilt and fitted with new viton shaft seals.
custom made plate to block off FIV on bottom of T/B - $200
*custom 4 gauge setup, mounts into upper facia area,with looms and all sensors.
(VDO exhaust temp,water temp,oil temp,oil pressure) ~~$500~~ $400!!!
Also comes with remote mounitng for oil pressure with hobbs pressure
switch for adjustable oil pressure warning light (pics page 5) cost a shit load new

*VDO 25psi boost gauge with light loom and mounting bracket $60
(pics page 5) (or will throw in with other gauges)

*washer bottle/intercooler spray relocation kit inc all lines,loom etc- ~~$125~~ $110 (pics page 5)
*Custom heat sheild, pics page 4 - ~~$100~~ ~~$80~~ $50
suit stock exhaust manifold, guides heat out of the bonnet vent.

- Genuine evo 2 Front bar, cover with grill and lower mesh, free ralliart badge too, no broken tabs etc in black.. generally good condition.
I have a front lip that i will chuck in but it has 100mm lawn edging rivted to it, no reo - $450ono -Genuine evo 2 bootlid and spoiler - black in gc - no dents or damage, with no fog lights or garnish. - ~~$450ono~~ ~~$400~~ $250
** evo 1-3 rally light pod - mounts onto the bonnet-fibreglass with PIAA lights ~~$175.00~~ $150
** evo 2-6 front lower control arm rear ralliart bushes - slightly used, no brakets $50.00 for the pair

all prices do not include postage

pm or call

0403 326 473

located in SE melbourne ]]> Thu, 23 Feb 2012 07:51:10 +0000 http://www.4gtuner.com/topic/16358-buy-my-sick-parts-sale/ Setrab oil cooler with bracket http://www.4gtuner.com/topic/20399-setrab-oil-cooler-with-bracket/ I bought this a year ago and never got to fit it, still in the box in new condition with mounting brackets and fittings p/n 50-625-7612 I bought it from aus genuine dealer. But asking $300 if anyone is interested Thu, 23 Feb 2012 07:41:54 +0000 http://www.4gtuner.com/topic/20399-setrab-oil-cooler-with-bracket/ Forum Battle - VIC GUYS MUST LOOK!!! http://www.4gtuner.com/topic/20402-forum-battle-vic-guys-must-look/
Support the car community and 4GTuner by joining the show and shine OR race in Forum Battle.

Not often does this happen.

GO TO THE VICTORIA section for more info!!!

Don't be shy!]]> Thu, 23 Feb 2012 06:42:28 +0000 http://www.4gtuner.com/topic/20402-forum-battle-vic-guys-must-look/ AUS SPEC T/B - FIAV rubber oring (funny shape) http://www.4gtuner.com/topic/20404-aus-spec-tb-fiav-rubber-oring-funny-shape/
Can you please get a price?

The seal between the FIAV and TB.
Aus spec one please.]]> Thu, 23 Feb 2012 06:20:07 +0000 http://www.4gtuner.com/topic/20404-aus-spec-tb-fiav-rubber-oring-funny-shape/ Lost interested sale! Cheap Cheap! http://www.4gtuner.com/topic/20269-lost-interested-sale-cheap-cheap/ No time or motivation and no more evos! Tho ive taken up fishing and boating!!!
These things need to be moved on! Quick and Cheap!

If need pics please ask.
No reserving parts, money talks!

Will trade for fishing equipment, kayak or anything related to the water!

NEW:

ARP Main stud kit 4G63T 7 bolt $100

USED:

Evo 1 disc to disc rear end (no dif or shocks) $200
GSR/Evo tailshaft $100
4G63/93 Starter motors x2 (untested condition but would of been binned if were crap) $30 each
070 Ported rear housing (ported hotside, slight crack nothing major) wastegate hole not cracked $70
070 Factory rear housing flapper slight crack $50
GSR/EVO passenger window switches $5 each
HH VR4 Aspec rear foglight garnish $10 pair
4G93T Alt (untried but came from working motor) $50
GSR Ecu MD187040 E2T38378 3422 E $90
GSR Ecu MD187040 E2T38378 4314 E $90
4G93T long motor (includes all accessories, came from running car) $450
GSR intake manifold $20
4G63T 7 bolt (i think RVR) intake manifold $20
4G63T 7 bolt lower piece timing cover x 2 $50 each
GSR lower timing belt cover $20
CC RH headlight $15
CC RH/LH headlight $25
GSR/EVO 1 front shocks LH/RH stock $50 pair
GSR/EVO 1 front shocks LH/RH yellow springs $80 pair
GSR/EVO 1 rear shocks LH/RH stock x 2 pairs $40 pair
GSR/EVO 1 koni rear shocks LH/RH yellow springs $80 pair
EVO III factory lower front pipe $70
CC GSR/EVO rear tailights $25 pair
CC GSR/Evo radio Surround (fascia) vgc $30
Evo I-III twin pot calipers and rear calipers $130 set
GSR Tranfercase (unknown condition, but pretty sure they were good otherwise would of binned) $80
4G93T passengers side driveshaft (2piece) $60
Evo PS pump $30 (unknown condition!)
CC GSR/Evo rad OK condition doesnt leak $50
CC GSR silver bonnet $30
CC doors (manual wind with glass) maroon $30 each ($100 set)
CC GSR/Evo rear bumper with Fibreglass E3 caps (silver) $120
CC GSR/Evo rear bumper black in color exhaust tip cutout $80

Probably got more things will double check and post later on.

Pick up preffered, if you want postage please arrange yourself. Postcode 3135
I reserve the right to charge for packaging (ie tape/boxes etc..)

No reasonable offers refused! will do cheaper for alot of items!

Jon]]> Thu, 23 Feb 2012 04:56:16 +0000 http://www.4gtuner.com/topic/20269-lost-interested-sale-cheap-cheap/ stupid allen key wheel nuts http://www.4gtuner.com/topic/20318-stupid-allen-key-wheel-nuts/
is there any other nuts that fit in the small space these go in?

I like the wheels i got but only can fit these :-(]]> Thu, 23 Feb 2012 04:28:08 +0000 http://www.4gtuner.com/topic/20318-stupid-allen-key-wheel-nuts/ Forum Battle Calder Park March 2012- 4GTUNER invite http://www.4gtuner.com/topic/20044-forum-battle-calder-park-march-2012-4gtuner-invite/ Just wanted to touch base and invite 4GTUNER to compete in the 2012 ARC Just Car Insurance Forum Battle at Calder Park Raceway.

The first event of its kind as Forum Battle infiltrates the Australian Rally Championship (ARC) at Calder Park in March 2012. This is all about online forums enjoying some light hearted competition against each other in an offline event spanning across multiple disciplines of motorsport and car culture including:

-Time attack
-Show and shine
-400m Drags
-Gymkhana
-Tarmac Rally Stage

Details:
Forum Battle will span over 2 days. There’s $20k’s worth of prizes up for grabs for forum members and prime time TV coverage on Channel 10 alongside the ARC coverage.

For more information and to be featured on the website: www.forumbattle.com.au
Look forward to your thoughts and feel free to contact me on 0432 884 177 or email support@forumbattle.com.au

Attached thumbnail(s)

]]> Thu, 23 Feb 2012 04:05:26 +0000 http://www.4gtuner.com/topic/20044-forum-battle-calder-park-march-2012-4gtuner-invite/ THE GSR - 423KW!!!!! http://www.4gtuner.com/topic/16562-the-gsr-423kw/
Since the last update the car is running and has been tuned @ 368kw with the stock head which caused a few problems (valve floating).

Spoken to APC and cams have been sent off to get some work done to them and also ordered valve springs which will hopefully stop the valve floating issue and maybe see power turned up a notch but more importantly 6 years of building the car will come to a happy end!

Ill keep you guys in the loop hopefully the car should be back on the dyno in a fortnights time!

Mod List:
Arias Pistons
PAR Rods
ARP Studs
Motec m48 with Motec CDI and Expander Unit
MSG Blaster coil pack x4
Custom plenum and hypertune throttle body
Aeromotive mechasnical pump set up
Twin PFI fuel rails with 8 1000cc injectors
Fuel cell mounted at the front
Every line braides with Earl fittings
Kinglser fuel reg
APC spec exhuast manifold and exhuast
NPC customer twin plate clutch and custom flywheel
Garrett t51r turbo
Bride Seats x2 with custom rails
Meridian Motorsport spec roll cage
Custom aluminum door panels
Locked front diff
JIC coilover suspension
Custom radiator

That all i can remember off the top of my head!

Attached thumbnail(s)

]]> Thu, 23 Feb 2012 01:45:50 +0000 http://www.4gtuner.com/topic/16562-the-gsr-423kw/ stuff for sale http://www.4gtuner.com/topic/20400-stuff-for-sale/ Price; $500
Extra Info:sold the my car and will post at buyers expence
Location: sydney
Preferred Contact Method; 0414782179
Pictures: up soon

Item: evo 3 injectors 510cc and fuel rail
Item Condition: excellent condition
Price:$200
Extra Info: Location: sydney
Preferred Contact Method: phone
Pictures: soon

Item: gsr lancer cc ecu chipped buy meek
Item Condition: working
Price; $250
Extra Info: been chipped for all the things i got for sale
Location: as above
Preferred Contact Method; as above
Pictures: soon

Item: afm 609
Item Condition: working
Price; $80
Extra Info: nothing
Location: as above
Preferred Contact Method; as above
Pictures: soon

Item: cc lancer full engine wiring loom
Item Condition: good
Price; $150
Extra Info: nothing
Location:as above
Preferred Contact Method; as above
Pictures: soon or ill send by phone

or $1000 for the lot]]> Wed, 22 Feb 2012 22:16:45 +0000 http://www.4gtuner.com/topic/20400-stuff-for-sale/